McIntosh 0 6 T r, 0 2 T r, How to Operate the MCD301, con’t, 0 4 T r, figures 16 and

0 2 : 3 6

Figure 20

0 2 : 3 6

Figure 18

0 2 : 3 6

Figure 19

How to Operate the MCD301, con’t

Repeat

This allows repeating a Track, Disc, Program Mode or Random Play Mode on a continuous basis. Refer to figures 6 on page 16 and 16.

1.With the disc playing (Regular, Program or Random Playback Modes), press the

RPT (Repeat) Push-button once to activate the Track

Repeat ( 1); press the RPT Push-button twice to

activate the Disc Repeat (All). Refer to figures

18 and 19.

4. To cancel the previously se- lected Repeat Mode, press

the RPT (Repeat) Push-button until the word “1” or the word “ALL” in the Front Panel Information Display is extinguished.

Random Playback

This feature allows for listening to Tracks of a Disc in a Random Order. Refer to figure 6 on page 16 and figure 16.

Note: The MCD301 must be in STOP Mode with the Disc Loaded and the Table of Contents read before the Random Playback Mode Feature can be activated.

1. With the MCD301 in the STOP Mode press the Random Push-button. The word RND (Random) will be indicated in the Infor-

mation Display. Refer to figure 20.

2. Press the PLAY Push- button to start Random

Playback. After all the tracks have been played the MCD301 will stop.

Notes: 1. To provide continuous playback of the disc, press the RPT Push-button twice to activate the Disc Repeat (All) after the Random Playback Mode has started. If Repeat (1) is selected, the current track will repeat.

2.The BACK TRACK function will begin playback from the beginning of the current track.

3.The NEXT TRACK function will advance to the next random selection and start playing.

3.To cancel the Random Playback Mode, press the STOP Push-button, then press the Random Push- button.

Program Playback

This feature allows for playback of selected Tracks on a Disc in the desired order. In the following example, a Disc

is programmed to play Track 6 followed by Track 4 and then Track 2.

Notes: 1. The MCD301 must be in STOP Mode with the Disc TOC (Table of Contents) read before the Program Playback Mode Feature can be activated.

2.When programming Hybrid SACD Discs, first choose the layer (SACD or CD) so the correct TOC can be read, as some discs have different selections for the SACD and CD Tracks.

1.Press the PGM (Program) Push-button to access the

Program Mode. Refer to1 2 T r

figures 16 and 21.
	Figure 21
2. Enter the first desired se-
lection using the Numeric	P 0 1	0 6 T r
Push-buttons. Refer to
figures 16 and 22.
3. In a similar manner, enter	Figure 22
the remaining Tracks. Re-
fer to figures 23 and 24.	P 0 2	0 4 T r
Note: To view and/or
delete the selec-
	Figure 23
tions programmed,
use the REVIEW
Push-button to	P 0 3	0 2 T r
step through pro-
grammed tracks
	Figure 24
and the CLEAR

Push-button to remove any unwanted selections.

4.To start playback of the just entered program, press the PLAY Push-button. The Repeat Mode can be activated to provide continuous playback of the Pro-

grammed Track(s). Refer to figure 25.

Note: To momentarily stop
playback, press the	P 0 1	0 6 T r
PAUSE Push-
button. To resume
	Figure 25
Program Playback

press the PLAY Push-button.

5.To cancel the Program Playback Mode press the STOP Push-button followed by pressing the PGM (Program) Push-button.

Once the Program Playback Mode is active, tracks may be added or deleted by first pressing the STOP Push-button followed by entering the additional tracks using the Nu- meric Push-buttons or deleting tracks by using the CLEAR Push-button. Press the PLAY Push-button to resume Program Playback Mode.

MP3/WMA Disc Playback

The MCD301 has the ability of playing back MP3 and

18