McIntosh MCD301 owner manual How to use the Remote Control

How to use the Remote Control

How to use the Remote Control

The Remote Control is capable of performing basic Oper- ating Functions for the MCD301 SACD/CD Player.

Notes: 1. Refer to the “How to Operate” Section of this man- ual for additional information using this Remote Control.

2.The translucent Remote Control Push-buttons will illuminate for approximately 3 seconds when activated.

Play

With a disc loaded, press the PLAY Push-button to start the disc playing.

Stop

Press the STOP Push-button to stop disc playback and return to displaying the table of contents of the disc.

Numbered Push-buttons

Press 1 through 9 to directly access one of the first nine Disc Tracks using the Front Panel Information Display. For track numbers greater than 10, press the +10 Push-button followed by the 0-9 Push-button. For example, to access Disc Track 23, press the +10 Push-button twice and then the 3 Push-button.

Pause

Press the PAUSEPush-button to temporarily stop disc playback at any time. Press the PLAY Push-button to resume playback.

REV and FF

Press the REV (Reverse) or FF (Fast Forward) Push- button to start moving rapidly through a track on the disc. When the desired location is reached release the REV (Reverse) or FF (Fast Forward) Push-button to resume normal playback.

Back and Next

Press the NEXT  Push-button to move forward one track or the BACK  Push-button to move back to the begin- ning of the current track playing.

Note: If the BACK  Push-buttonis pressed during play- back of the first three seconds of the track, the MCD301 will start playing back the previous track from the beginning. If the Front Panel Information Display is indicating time the display will momentarily indicate the track number.

SACD/CD

Press to select the SACD or CD Tracks from a hybrid disc for playback.

Display/Time

Press the DISPlay/TIME Push-button to access various disc times. It is also used to return the Front Panel Infor- mation Display to indicating time instead of text informa- tion on a SACD Disc.

Menu/Text

Press to select the various text information on a SACD Disc such as Album, Artist and Track Titles (disc depen- dent).

Repeat Modes

Press the RPT (Repeat) Push-button to select either One Track, All Tracks or cancel the Repeat Mode.

Program

Press the PGM (Program) to activate the Program Mode to playback only certain disc tracks in the desired order.

Review

Press the RVW (Review) Push-button to review the Pro- grammed Tracks from the disc on the Front Panel Informa- tion Display, while in the Program Mode.

Clear

Press the CLEAR Push-button to erase a program track(s).

15