Hatco GRH, GRN, GRA Accessories, Remote Control Enclosures, Incandescent Light, Indicator Light

ACCESSORIES

REMOTE CONTROL ENCLOSURES

Hatco Remote Control Enclosures are available in various sizes and configurations for use with the Strip Heaters. All models are built in accordance with U.L. standards to accommodate switches, indicator lights and wiring. Consult the factory for type and location of switches for enclosure.

NOTICE

To prevent premature failure to components the Remote Control Box (RMB) must be installed outside the strip heater heat zone.

NOTE: Proper use of RMB’s require one RMB per strip heater.

INCANDESCENT LIGHT

The Strip Heaters with aluminum housings may be equipped from the factory with incandescent display lights to illuminate the warming area.

Hatco shatter-resistant bulbs guard against injury and food contamination in the event of breakage. The display lighting meets NSF standards for food holding and display areas.

NOTE: Display lights cannot be retrofitted to units.

INDICATOR LIGHT

An optional red indicator light is available for mounting on either side of the unit. The indicator light provides an instant visual check of the unit operation.

					A					B
	C
				D
			Width			Depth	Height		Width
		Models		(A)		(B)	(C)			(D)
RMB-3 Series			5-1/2"			3"	2-1/2"	7"
			(140 mm)			(76 mm)	(64 mm)		(178 mm)
RMB-7 Series			9"			3"	2-1/2"	10-1/2"
			(229 mm)			(76 mm)	(64 mm)		(267 mm)
RMB-14 Series			14"			3"	2-1/2"	15-1/2"
			(356 mm)			(76 mm)	(64 mm)		(394 mm)
RMB-16 Series			16"			3"	2-1/2"	17-1/2"
			(406 mm)			(76 mm)	(64 mm)		(445 mm)
RMB-20 Series			20"			3"	2-1/2"	21-1/2"
			(508 mm)			(76 mm)	(64 mm)		(546 mm)

Figure 24. Dimensions -

Remote Control Box (RMB)

21 Form No. GRM-0707