American Standard 7236L / V, 2645L / V, 2774L Operation, Air Volume Control Adjustments, More Air

OPERATION:

NOTE: Each whirlpool is shipped from the factory with an air actuator on/off switch and pump with attached power supply cord. OPERATING THE SYSTEM WITHOUT WATER (DRY RUNNING) WILL CAUSE PUMP DAMAGE AND VOID THE WARRANTY. Always fill the whirlpool before operating the pump. The air switch is mounted either on the deck or side wall of the tub.

1.Fill the Whirlpool: Water level must be at least one inch (25mm) above the highest jet for proper operation. (See diagram below.)

Do not fill whirlpool more than 2/3 full prior to the user completely immersing themselves into unit.

2.Start Whirlpool: Push on center of button. Button will depress and whirlpool will start.

3.Stop Whirlpool: Depress and release button and whirlpool will stop.

SAFE-T-HEATER
REMOVABLE BLANK *	AIR TUBING	AIR ACTUATOR SWITCH
		(location varies with model)
WATER LEVEL

OUTLET MUST BE

GFCI PROTECTED

(all heaters require separate GFCI)

*6060L/V includes factory installed heater

4.Air Volume Control Adjustments: Water turbulence is determined by the amount of air mixed with the water. Rotate the air volume control counterclockwise for more turbulence--clockwise for less.

Air Volume Control Adjustments:

MORE AIR LESS AIR

753737-100 Rev. E 14