American Standard 2703.218W, 2705.118W, 2705.218W Ellisse Built-Inwhirlpool, High Gloss Acrylic

ELLISSE BUILT-IN™ WHIRLPOOL

HIGH GLOSS ACRYLIC

ELLISSE BUILT-IN WHIRLPOOL

Whirlpool Featuring System II:

❏2703.128W End Mount Pump, Right Hand Outlet

❏2703.228W End Mount Pump, Left Hand Outlet

❏2705.128W Front Mount Pump, Right Hand Outlet

❏2705.228W Front Mount Pump, Left Hand Outlet

•Acrylic with fiberglass reinforcement

•Pre-leveled tub bottom

•Dual, molded-in arm rests

•Integral 3-sided tiling/water retention flange

•2.0 HP, two speed, self-draining pump/motor with pulse feature

•Factory installed power cord and plug

•Six multi-directional and flow-adjustable jets including:

-Two foot jets

-Two body massage jets

-Two back-rest jets

•Deck-mounted electronic control with 20

minute built-in timed safety shut off and Chrome Bezel

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

StayClean™ Whirlpool Featuring System II:

❏2703.128WC End Mount Pump, Right Hand outlet

❏2703.228WC End Mount Pump, Left Hand outlet

❏2705.128WC Front Mount Pump, Right Hand outlet

❏2705.228WC Front Mount Pump, Left Hand outlet

•Same as above except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions: 1524 x 813 x 546mm (60” x 32” x 21-1/2")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

To Be Specified - Required:

❏Color:

❏Bath Filler: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

❏Grab Bar Kit: 9827-200-two per kit (specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Ellisse Apron: 9160.2705(specify color)

❏Jet Trim Ring Kit: 9860.200-two per kit (specify finish)

❏System II Control Bezel: 9861.200-two per kit (specify finish)

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

BV-18

Rev. 3/03 © 2003 American Standard Inc.