American Standard 2709.XXXW installation instructions Xxxw Series Whirlpool/Bathing Pool, Tools

ELLISSE OVAL™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2709.XXXW SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

						1759 mm
				240 mm		(69-1/4)
							▲OUTLINE OF
				(9-7/16)
							CUTOUT
SEE FTTG.SPECS
FOR DIMENSION
C OF SUPPLIES						ON/OFF
						SWITCH
L
					305mm(12) X 229 mm(9)		PUMP
					CUTOUT IN FLOOR FOR DRAIN
978 mm
(38-1/2)
489mm
(19-1/4)							PROVIDE ACCESS
							TO PUMP FOR
76mm							SERVICING ON ALL
							INSTALLATIONS
		(3)
			CL OF DRAIN
			OUTLET
							C/L OF
SAFE-T-HEATER				C/L OF		SHOWER ARM
				VALVES
REMOVABLE BLANK
86mm						C/L OF
(3-3/8)			102mm
	305mm					SPOUT
38mm		(12)	(4)
(1-1/2)							1651-1981mm
							(65-78)
							OPTIONAL
502mm							INTEGRAL
(19-3/4 )							FEET
464mm							SUPPORT
(18-1/4)							ROUGH
							FLOOR
			1-1/2 N.P.T.M.			35mm
				THREADS
			1-1/2 O.D.			(1-3/8)	98mm
			TAILPIECE				(3-7/8)

GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL

INSTALLED SIZE		69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)
WEIGHT							107 Lbs. (49 Kg.)
WEIGHT w/WATER						640 Lbs. (291 Kg.)
GAL. TO OVERFLOW								64 Gal. (243 L)
WHIRLPOOL MIN. OPERATING VOL.								53 Gal. (201 L)
BATHING WELL AT SUMP				45 x 23 In. (1143 x 584mm)
BATHING WELL AT RIM				63 x 32 In. (1600 x 813mm)
WATER DEPTH TO OVERFLOW								13 In. (330mm)
FLOOR LOADING			35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
(PROJECTED AREA)
PTS.										25.6
CUBE (FT3)									49.4
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP					2.1 HP, 14.4 AMPS, 120V.
SYSTEM II PUMP					2.1 HP, 15.6 AMPS, 120V.

SAFETY HEATER ________________________________12 AMPS, 120V.

GENERAL INSTALLATION INFORMATION

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

*see your American Standard Distributor

List of Required Components (not included):

•Drain 1583.470*

•Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFCI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

751753-100 Rev.JAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.