American Standard 2771VC EVOLUTION 5 X WHIRLPOOL AND BATHING POOL, High Gloss, Revised 3/06

60 x 36 x 21-1/2 (1524 x 914 x 546mm) 60 Lbs. (27 Kg.)

785 Lbs. (356 Kg.)

87 Gal. (329 L.) 41-1/4 x 26-1/4 In. (1048 x 667mm)

EVOLUTION™ 5' X 36"

WHIRLPOOL AND BATHING POOL

60"

(1524mm)

HIGH GLOSS

11"

(279mm)

3-1/4" (83mm)

CUT OUT IN FLOOR
FOR DRAIN	3"
	(76mm)
	6"	36"
	(152mm)	(914mm)
	7-1/2"
	(191mm)
	13-3/4"
	(349mm)

36"

(914mm)

C/L OF

OVERFLOW

21-1/2"(H)

(546mm)

20-1/8"(A)

20"(C)(511mm) (508mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2771V WHIRLPOOL

INSTALLED SIZE				60 x 36 x 21-1/2 In.
		(1524mm x 914 mm x 546mm)
WEIGHT						75 Lbs. (34 Kg.)
WEIGHT w/WATER					800 Lbs. (363 Kg.)
GAL. TO OVERFLOW						87 Gal. (329 L.)
MIN. OPERATING GAL.						50 Gal. (189 L.)
BATHING WELL AT SUMP					41-1/4 x 26-1/4 In.
			(1048mm x 667mm)
BATHING WELL AT RIM	52-1/2 x 30 In. (1334mm x 762mm)
WATER DEPTH TO OVERFLOW					18-1/2 In. (470mm)
FLOOR LOADING		53 Lbs./Sq. Ft. (260 Kgs/Sq. m.)
(PROJECTED AREA)

	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP	1.4 HP, 9.7 AMPS, 120V.

NOTES:

GENERAL SPECIFICATIONS FOR 2771V BATHING POOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM	52-1/2 x 30 In. (1334 x 762mm)
WATER DEPTH TO OVERFLOW		18-1/2 (470mm)
FLOOR LOADING	52 Lbs./Sq.Ft. (255 Kgs./Sq.m)
(PROJECTED AREA)

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

■OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	H94
© 2008 AS America Inc.		Revised 3/06