American Standard 2806.002 dimensions Cube FT3, General Specifications for 2806 Whirlpool

72 x 35-3/4 x 21-1/2 In. (1829 x 908 x 546mm) 120 Lbs. (52 Kg.)

729 Lbs. (331 Kg.)

73 Gal. (276 L)

HERITAGE™ 6'

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

1829mm

279mm(72) (11)

457mm	229 x 330mm	PUMP
(18)	(9 X 13)
	FLOOR
	CUTOUT

908mm (35-3/4)

INTEGRAL	ON/OFF
FITTING DECK	SWITCH

140mm		OUTLINE OF		PROVIDE ACCESS
(5-1/2)	C/L OF
		CUTOUT	TO PUMP FOR SERVICE
	DRAIN
			ON ALL INSTALLATIONS
	OVERFLOW
C/L OF	108mm	LEVELING STRINGER
OVERFLOW	(4-1/4)	(NOT FOR SUPPORT)
				SAFE-T-HEATER
				REMOVABLE
	51mm			546mm BLANK
INTEGRAL	(2)			(21-1/2)
FEET				495mm
SUPPORT
				(19-1/2)
ROUGH
FLOOR
	1-1/2 N.P.T.M. THREADS
	1-1/2 O.D.TAILPIECE		51mm	108mm
				(4-1/4)
			(2)

1829mm

279mm(72) (11)

457mm	229 x 330mm
(18)	(9 X 13)
	FLOOR
	CUTOUT

908mm (35-3/4)

INTEGRAL

FITTING DECK

140mm	C/L OF	OUTLINE OF
(5-1/2)
	DRAIN	CUTOUT

OVERFLOW

C/L OF	108mm	LEVELING STRINGER
OVERFLOW	(4-1/4)	(NOT FOR SUPPORT)
	51mm		546mm
INTEGRAL	(2)		(21-1/2)
FEET			495mm
SUPPORT
			(19-1/2)
ROUGH
FLOOR
	1-1/2 N.P.T.M. THREADS
	1-1/2 O.D.TAILPIECE	51mm	108mm
			(4-1/4)
		(2)

GENERAL SPECIFICATIONS FOR 2806 WHIRLPOOL

INSTALLED SIZE		72 x 35-3/4 x 21-1/2 In. (1829 x 908 x 546mm)
WEIGHT				135 Lbs. (61 Kg.)
WEIGHT w/WATER				744 Lbs. (338 Kg.)
GAL. TO OVERFLOW				73 Gal. (276 L)
WHIRLPOOL MIN. OPERATING VOL.				44 Gal. (167 L)
BATHING WELL AT SUMP				45 x 24 In. (1143 x 610mm)
BATHING WELL AT RIM			60 x 30 In. (1524 x 762 mm)
WATER DEPTH TO OVERFLOW				15 In. (381mm)
FLOOR LOADING			41 Lbs./Sq.Ft. (198 Kgs./Sq.m)
(PROJECTED AREA)
PTS.					25.6
CUBE (FT3)						49.4
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP				2.1 HP, 15.6 AMPS ,120V.

GENERAL SPECIFICATIONS FOR 2806 BATHING POOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP			45 x 24 In. (1143 x 610mm)
BATHING WELL AT RIM		60 x 30 In. (1524 x 762 mm)
WATER DEPTH TO OVERFLOW				15 In. (381mm)
FLOOR LOADING	41 Lbs./Sq.Ft. (198 Kgs./Sq.m)
(PROJECTED AREA)
PTS.					25.6
CUBE (FT3)						49.4

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

▲CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY. OPTIONAL GRAB BAR KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

SUPPLY PIPING NOT INCLUDED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	H44
© 2008 AS America Inc.		Revised 2/08