American Standard 2908.XXXW installation instructions List of Optional Components not included

REMINISCENCE DROP-IN™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2908.XXXW SERIES

WHIRLPOOL

INSTALLATION INSTRUCTIONS

330mm

(13)

457mm

(18)

914mm

(36)

	1676mm
ON/OFF	(66)
SWITCH
229 x 305mm	PUMP
(9 X 12)

FLOOR

CUTOUT

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical

INTEGRAL		64mm REF.
		(2-1/2)
FITTING DECK
152mm		OUTLINE OF	PROVIDE ACCESS
(6)	C/L OF		TO PUMP FOR SERVICE
		CUTOUT
	DRAIN		ON ALL INSTALLATIONS
	OUTLET	SAFE-T-HEATER
	RIM AT
		REMOVABLE BLANK
	DRAIN END
C/L OF OVERFLOW		LEVELING STRINGER		73mm
		(NOT FOR SUPPORT)
				(2-7/8)
149mm REF.
(5-7/8)
INTEGRAL	79mm			616mm
	(3-1/8)			(24-1/4)
SUPPORT
FEET				464mm
ROUGH				(18-1/4)
FLOOR
	1-1/2 N.P.T.M. THREADS
	1-1/2 O.D.TAILPIECE	70mm		117mm
				(4-5/8)
		(2-3/4)

connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

GENERAL SPECIFICATIONS FOR 2908 WHIRLPOOL

INSTALLED SIZE	66 x 36 x 24-1/4 In. (1676 x 914 x 616mm)
WEIGHT					95 Lbs. (43 Kg.)
WEIGHT w/WATER				659 Lbs. (299 Kg.)
GAL. TO OVERFLOW					68 Gal. (257 L.)
MIN. OPERATING GAL.					55 Gal. (208 L.)
BATHING WELL AT SUMP			40 x 18 In. (1016 x 457mm)
BATHING WELL AT RIM			53 x 28 In. (1330 x 718mm)
WATER DEPTH TO OVERFLOW					15 In. (381mm)
FLOOR LOADING		40 Lbs./Sq. Ft. (191 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.						23.8
CUBE (FT3)						44.5

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP		1.6 HP, 9.7 AMPS, 120V.
SYSTEM II PUMP	2.1 HP, 15.6 AMPS, 120V.

Tools		Supplies
•	Level	•	Nails
• Tape Measure		• Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	• 15 or 20 amp
•	Personal Safety		GFI Outlet
	Equipment	•	Cement, Plaster,
• Caulking Gun			Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2005

752535-100 Rev. FAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.