American Standard 2625.014 dimensions Oakmont Champion Elongated Toilet, Tank Nominal Dimensions

OAKMONT CHAMPION® 4

ELONGATED TOILET

VITREOUS CHINA

OAKMONT CHAMPION® 4 ELONGATED TOILET

❑2625.014

•Vitreous china

•EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® 4 Flushing System performance platform

•4" non-adjustable, piston action Accelerator™ flush valve

•Elongated siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect® tank/bowl coupling system

•Chrome-plated trip lever

•Sweeping pier on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❑3153.016 Elongated Bowl

❑4272.014 Tank

Nominal Dimensions:

772 x 492 x 844mm

(30-3/8" x 19-3/8" x 33-1/4")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures- includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability - July, 2003 revision

	FINISHED WALL
	772mm
	(30-3/8)
	32mm ± 6mm	492mm
	(1-1/4 ± 1/4)	(19-3/8)
	216mm
	(8-1/2)
	470mm
	(18-1/2)
		356mm
	C/L OF SEAT POST HOLES	(14)
	140mm (5-1/2 CENTERS)
		844mm
	SUPPLY	(33-1/4)
	AS
83mm 1/4)-(3	REQ'D
	387mm
	(15-1/4)
	*254mm(10)

				16mm			152mm
		273mm	(5/8)			FINISHED	(6)	286mm
					381mm	FLOOR
	(10-3/4)						(11-1/4)
			(15)
305mm				C/L OF OUTLET
(12)

To Be Specified:

❏Color:

❏White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏Seat: (please specify color)

❏Champion® Slow Close Elongated #5325.010

❏Rise & Shine Elongated #5324.019

❏EverClean® Elongated Seat with Slow Close Snap-Off Hinges #5321.110

❏Supply with stop:

© 2008 AS America Inc.

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K19

Revised 2/08