| Installation | |
| Instructions | |
ARCH | 4101.350 | |
4101.351 | ||
| ||
| ||
KITCHEN FAUCET |
|
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds
4101.3514101.350
Certified to comply with ANSI A112.18.1M
M968584
RECOMMENDED TOOLS
Adjustable Wrench | Regular Screwdriver | Phillips Screwdriver | Channel Locks |
1 | INSTALL FAUCET WITH DECK ESCUTCHEON |
(4101.351) |
CAUTION | Turn off water at |
main supply. | |
|
|
Installation with DECK ESCUTCHEON: Apply a light bead of plumbers putty to underside of ESCUTCHEON (1) if mounting surface is uneven. Place ESCUTCHEON (1) onto sink or mounting surface with large opening
to the right as shown. Insert supply HOSES (2) and SHANK (3) through ESCUTCHEON (1) and mounting surface. Make sure slot in fitting base aligns with tab on ESCUTCHEON (1). Figure 1.
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening the SCREWS (8) slightly each time until all are snug to ensure even pressure.
Install SPOUT ASSEMBLY: Insert HOSE (9) and SHANK (10) through ESCUTCHEON (1) and mounting surface. Make sure slot in spout base aligns with tab on ESCUTCHEON (1). Figure 2.
Assemble RUBBER WASHER (4a), BRASS WASHER (5a), and threaded LOCKNUT (6a) onto SHANK (10) from underside of sink or mounting surface. Hand tighten LOCKNUT (6a). Use a screwdriver to tighten SCREWS (8a) on LOCKNUT (6a) the same as fitting installation above.
Align SOAP DISH (11) and push into place.
7
Figure 1 | Figure 2 |
SLOT
3
12
ALIGN SLOT
AND TAB
TAB |
| SLOT |
|
|
| ALIGN SLOT | 10 |
|
| AND TAB | |
| 11 | TAB |
|
|
|
|
4 | 5 |
|
|
|
|
| 4a |
| |
| 6 | 1 | 5a | |
|
| |||
| 8 |
|
| 6a |
|
|
| 8a | 9 |
|
|
|
|
