| Installation | |
PEKOE EXTENDER | Instructions | |
4335.020.XXX | ||
SINGLE CONTROL KITCHEN | ||
| ||
|
|
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI A112.18.1M
M 9 6 8 5 8 2
Recommended Tools
Phillips Screwdriver
Channel Locks | Adjustable Wrench | Plumbers' Putty or Caulking | Tubing Cutter |
|
|
1 INSTALL FITTING
CAUTION | Turn off hot and cold water |
|
supplies before beginning. |
| |
Make certain the SEAL (1) is properly seated in recess |
| |
of faucet body. |
| |
Insert supply HOSES (2) and SHANK (3) through center |
| |
hole of sink or mounting surface. |
| |
Assemble RUBBER WASHER (4), PLASTIC WASHER (5), |
| |
METAL WASHER (6) and threaded LOCKNUT (7) onto |
| |
SHANK (3) from underside of sink or mounting surface. |
| |
Hand tighten LOCKNUT (7) and check that faucet is centered. |
| |
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7). |
| |
Work your way around LOCKNUT (7), tightening the screws | RECESS | |
slightly each time until all are snug to ensure even pressure. |
3
4
5
6
7
8
1
2