American Standard Rope Twist Bath Walls installation instructions Installation Instructions

Installation Instructions

ROPE TWIST™ BATH WALLS

MODEL: 5030.LBW

USED WITH SOAKING TUBS: 2722.102, 2722.202

Thank you for selecting American-Standard...the benchmark of fine quality
for over 100 years. To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.	753846 - 100 Rev . C
BEFORE YOU BEGIN....

NOTE: Local building codes vary by location. Observe all local plumbing and building codes.

Unpack your new shower walls and inspect them carefully for damage. Verify that the walls are the correct size for your installation. Refer to American Standard roughing-in information for specific dimensions for each model.

TOOLS & MATERIALS REQUIRED....

TOOLS:

•Drill & Hole Saw or Sabre Saw

•Tape Measure

•Caulking Gun

•Pencil

•Square

•Level

MATERIALS:

•Clear Silicone Sealant

•Acrylic/Latex Sealant

•Galvanized (or corrosion resistant) flat head screws 3/4" minimum length

•2 x 4 lumber for additional wall studs as required

•Tub Surround Adhesive

NOTE: Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.

HOTLINE FOR HELP

FOR TOLL FREE INFORMATION AND ANSWERS TO YOUR QUESTIONS, CALL:

1 (800) 442-1902, in Canada call 1 (800) 387-0369. Weekdays 8:00 a.m. to 4:00 p.m. Eastern time.

© A m e r i c a n S t a n d a r d I n c . 2 0 0 7

1