5
A)Apply a bead of tub surround adhesive down each stud that will come in contact with the side panels being sure to stay below the line previously marked.
B)Lay a bead of silicone caulk along side panel mating surface and tub ledge.
C)Align the top nailing flange of each side panel with pencil line marked. Press firmly into place to ensure proper adhesion to studs. Check alignment with all mating surfaces and reposition if necessary.
Pencil line
Silicone Sealant (side panel mating surface)
Tub Surround
Adhesive
(studs)
Silicone
Sealant
(tub ledge)
D)• Locate and drill a clearance hole in the center of the top nailing flange and centered on each stud (see arrows as shown).
•Also drill clearance holes in the front nailing flange on each side panel at approx. 12" intervals, centered on the flange (see arrows as shown).
•Install galvanized screws through each hole and into the studs, securing the wall panel.
Drill clearance 
holes for screws
5 | 753846 - 100 Rev . C |
