American Standard 6028.240 body. Fig. A, Fig. B. DOWN, Pop-Updrain, Remove Flange

2 POP-UP DRAIN

Remove CLEAR PLASTIC COVER (1).

Remove CARDBOARD SPACER (2) from under DRAIN POP-UP (3).

Tighten TAILPIECE (4) on DRAIN BODY before installing DRAIN BODY. Fig. B.

Fig. A.

1

3

2

Fig. B.

DRAIN

BODY

4

3 REMOVE FLANGE

Thread FLANGE (1) counter-clockwise and remove FLANGE (1) and FOAM GASKET (2) from drain

body. Fig. A.

Thread LOCKNUT (3) clock-wise to bottom of drain body. Push GASKET (4) down against LOCKNUT (3). Fig. B.

Fig. A.

1

2

Fig. B.

4

3

4	INSTALL DRAIN FROM
	BELOW FIXTURE

From under side of SINK

REAR OF SINK

5 TIGHTEN LOCKNUT

Tighten LOCKNUT (1) firmly with Adjustable

install DRAIN BODY (1) up through drain outlet.

Note: No plumber’s putty or caulk is required.

The CABLE ATTACHMENT POINT (2) must face towards the rear of the SINK.

4

3

DRAIN OUTLET

1

Wrench or Channel Locks.

1

Install FOAM GASKET (3) and FLANGE (4) onto drain body from above SINK and tighten FLANGE (4) firmly.

2

6 FLANGE GASKET AND POP-UP KNOB

Check DRAIN FLANGE in SINK to ensure that WHITE FOAM GASKET (3) is fully compressed and not visible. Fig. A.

POP-UP KNOB (1) must be fully down. Fig. B.

Fig. A.

WHITE FOAM
GASKET	DRAIN
NOT VISIBLE	FLANGE

Fig. B. DOWN

1

M968491 Rev . 1 . 2

2