American Standard 6060EC dimensions Cadenza Elite Corner, Whirlpools By American Standard

CADENZA ELITE™ CORNER

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

CADENZA ELITE™ CORNER WHIRLPOOL Comfortable two person design with dual back support positions, integral seat and installed grab bar. Includes factory installed E-Z- Install™ Whirlpool Heater .

❏6060E (specify White 020, Bone 021, or Linen 222)

•Acrylic with fiberglass reinforcement

•2.0 HP self-draining pump/motor

with dry run seal

•Ten multi-directional and flow adjustable jets including:

Two high performance Ideal-flow™ Jets Eight interchangeable Flex-jets™

•Three silent air volume controls

•Deck-mounted On/Off control

•Complete factory installed and tested whirlpool system

❏6060EC (specify White 020, Bone 021, or Linen 222)

•Same as above with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions:

54-1/2” x 54-1/2” x 21-1/2" (1384 x 1384 x 546mm)

Installed Size: 76-3/4” x 65-3/8” x 21-1/2" (1949x 1661 x 546mm)

Components Needed:

❏Bath Filler*: (specify finish)

❏Bath Drain: BATH-DRAIN

(specify Chrome 002, Polished Brass 099, or Satin 295)

Custom Accessories Available:

❏Pulse Jet Kit: PULSE-JET (two per kit, specify White 020, Bone 021, or Linen 222)

❏Soft Jet Kit: SOFT-JET (two per kit, specify White 020, Bone 021, or Linen 222)

❏Corner Apron: CORNER-APRON (specify White 020, Bone 021, or Linen 222)

❏Tile Bead Kit: TILE-BEAD

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

* See American Standard Faucet Selector

SPS 6060E

HD-001

Revised 10/03 © 2003 American Standard Inc.