American Standard 7236.XXXW installation instructions Xxxw Series Whirlpool, Virtuoso, Thank You

VIRTUOSO™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

7236.XXXW

SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

				1829mm
			914mm	(72)	19mm
			(36)
					(3/4)
CUTOUT	X 876mm	X 34-1/2)			TYP.
			914mm
OUTLINE OF	1791mm	(70-1/2	(36)
				PUMP
				178mm X 356mm	PROVIDE ACCESS	TOPUMP FOR SERVICE ON ALL INSTALLATIONS
				(7 x 14) CUTOUT
			C/L OF	102mm
			DRAIN	(4)	470mm
			279mm		(18-1/2)
			(11)	RECOMMENDED	ON/ OFF
					SWITCH
				FITTING LOCATION
				64 X 279mm (2-1/2 X 11)
			C/L OF	SAFE-T-HEATER
			OVERFLOW		51mm
				REMOVABLE BLANK
					(2)
			76mm
			(3)
					489mm
					(19-1/4)

		LEVELING	540mm
44mm		STRINGER
		NOT FOR	21-1/4
(1-3/4)		SUPPORT
89mm		ROUGH FLOOR
	1-1/2 N.P.T. THREAD	INTEGRAL
(3-1/2)		FEET
	1-1/2 O.D.

TAILPIECE

GENERAL SPECIFICATIONS FOR 7236 WHIRLPOOL

INSTALLED SIZE	72 x 36 x 21-1/4 In. (1829 x 914 x 540mm)
WEIGHT		101 Lbs. (45 Kg.)
WEIGHT w/WATER		751 Lbs. (338 Kg.)
GAL. TO OVERFLOW		78 Gal. (296 L)
WHIRLPOOL MIN. OPERATING VOL.		69 Gal. (262 L)
BATHING WELL AT SUMP		46 x 18 In. (1168 x 457mm)
BATHING WELL AT RIM		66 x 30-1/2 In. (1676 x 775mm)
WATER DEPTH TO OVERFLOW		15-3/4 In.(400mm)
FLOOR LOADING		42 Lbs./Sq.Ft. (204 Kgs./Sq.m)
(PROJECTED AREA)
PTS.		25.6
CUBE (FT3)		49.4
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP		2.1 HP,15.6 AMPS,120V.

GENERAL INSTALLATION INFORMATION

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•6 Foot Apron 0727.200*

•Safe-T-Heater 9075.120*

•Tile Bead Kit 751755-100*

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

750729-100 REV. HAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.