Panasonic KX-FLB851 manual Document tray, Output tray, Attaching the tray label

1. Introduction and Installation

1.6 Document tray

Insert the document tray (1) into the slot (2) on the unit.

2

1

1.7 Output tray

This unit has 3 pieces of output tray. As a default setting, printed paper is stacked on the output tray as follows.

–Upper output tray (“#1”): Printed document by using the computer and copied document.

–Lower output tray (“#3”): Received fax document.

LYou can change the output tray setting for faxing (feature #441 on page 65) and for copying (feature #466 on page 67). You can also select the middle output tray (“#2”). To change the output tray from the computer, set the printer properties. See page 50, 55 for details.

1.7.1 Attaching the tray label

Attach the tray label (1) to the output tray (2).

LLabel 1 to the upper output tray (“#1”) L Label 2 to the middle output tray (“#2”) L Label 3 to the lower output tray (“#3”)

2

1

Note:

LInstead of the label 1, 2, 3, you can also attach other labels for print, copy or fax according to the usage. For a blank label, this is convenient if the optional LAN board is installed. You can write the user name on the blank label and attached it to the selected output tray.

14For assistance, please visit http://www.panasonic.com/consumersupport