Panasonic manual Transparencies, Labels, Select Panasonic KX-FLB851 as the active printer

7. Multi-Function Station software

Note:

LFor Microsoft PowerPoint®, select [Color] or remove the check next to [Grayscale] in the print dialog so that colored text will be printed in grayscale.

3Select [Panasonic KX-FLB851]as the active printer.

L If you have changed the name of the unit when installing, select that name from the list.

L To change the printer settings, proceed as follows.

For Windows 98/Windows Me:

Click [Properties], then click the desired tab. Change the printer settings, then click [OK].

For Windows 2000:

Click the desired tab and change the printer settings.

For Windows XP:

Click [Preferences], then click the desired tab. Change the printer settings, then click [OK].

4Click [Print].

LThe unit will start printing.

Note:

LTo load paper, see page 15.

LFor details about the paper specifications, see page 50, 93.

Setting the printer properties

You can change the printer setting in step 3. We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities.

You can change the settings on following tabs. Paper: Paper size, paper type, paper source, etc.

Output: Pages per sheet, output tray, etc.

Quality: Graphics mode, resolution, toner save feature, etc.

Note:

LTo select [Envelope] for paper type on the [Paper] tab, you need to select [Envelope #10] or [Envelope DL] for paper size.

LYou can select the output tray for each printing on the [Output] tab. To change the

default output tray, see page 55.

LWhen printing from a computer, the toner save feature on the [Quality] tab overrides the unit’s toner save setting (feature #482 on page 63).

7.4.2 Transparencies

Use transparencies designed for laser printing.

We recommend the following:

3M® CG3300/CG5000

LUse the multi-purpose input tray to print

transparencies.

L Load transparency sheets one page at a time for printing, print-side down.

LPrinted transparency will be stacked on the upper output tray.

LRemove each transparency after printing

and place it on a flat surface to cool and to prevent it from curling.

LDo not re-use transparencies that have

already been fed through the unit. This includes transparencies that have been fed through and ejected without being printed on.

LSome types of transparencies have instructions recommending which side to print on. If the print quality is poor, try printing on the other side.

7.4.3 Labels

Use labels designed for laser printing. We recommend the following:

Avery® 5160/5161/5162/5163/5164/5165/5167/5168

XEROX® LWH100/LWH110/LWH120/LWH130/LWH140

LUse the multi-purpose input tray to print

labels.

LLoad label sheets one page at a time for

printing, print-side down.

LPrinted label will be stacked on the upper

output tray.

LRemove each label after printing.

LDo not use the following types of labels:

–Labels that are wrinkled, damaged or separated from the backing sheet.

–Any sheet of labels that has spaces in it where some of the labels have been removed.

–Labels that do not completely cover the backing sheet as follows.

50