Fax features, #482 Setting toner save feature

8. Programmable Features

To set the timer before returning to the default operation mode (feature #463).

{0} “OFF”: Deactivates this feature.

{1} “30s”: 30 seconds

{2} “1min” (default): 1 minute

{3} “2min”: 2 minutes

{4} “5min”: 5 minutes

{#}{4}{8}{2} Setting toner save feature

TONER SAVE

MODE=OFF [V^]

{0} “OFF” (default): Deactivates this feature.

{1} “ON”: The toner cartridge will last longer.

Note:

LThis feature may lower the print quality by reducing toner consumption.

8.4 Fax features

{#}{4}{0}{1} Printing a confirmation report

CONFIRM REPORT

=ERROR [V^]

To print a confirmation report for fax transmission results (page 27).

{0} “OFF”: Confirmation reports will not be printed.

{1} “ON”: A confirmation report will be printed after every transmission.

{2} “ERROR” (default): A confirmation report will be printed only when fax transmission fails.

{#}{4}{0}{2} Setting the journal report to print automatically

AUTO JOURNAL

MODE=ON [V^]

{0} “OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions.

{1} “ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 27).

{#}{4}{1}{1} Sending documents overseas

OVERSEAS MODE

=ERROR [V^]

If you cannot send a fax overseas even if the number is correct and the line is connected, activate this feature before sending the fax.

This feature improves the reliability by reducing the transmission speed.

{0} “OFF”: Deactivates this feature.

{1} “NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.

{2} “ERROR” (default): When the previous fax transmission fails and you wish to re-send the document.

Note:

LThis feature is not available for broadcast transmission.

L Calling charges may be higher than usual.

{#}{4}{1}{2} Sending a fax at a specific time

DELAYED SEND