Panasonic KX-FLB851 manual L If the Choose Setup Language dialog box does not appear

7. Multi-Function Station software

LInstall Multi-Function Station before connecting the unit to a computer. If the unit is connected to a computer before installing Multi-Function Station, the [Found New Hardware Wizard] dialog box will appear. Click [Cancel] to close it.

2Insert the included CD-ROM into your CD- ROM drive.

L The [Choose Setup Language] dialog box will appear. Select the desired language that you want to use with this software from the drop-down list. Click [OK]. The installation will automatically start.

L If the [Choose Setup Language] dialog box does not appear:

The installation will automatically start. L If the installation does not start

automatically:

Click [Start]. Choose [Run...]. Type

“D:\setup” (where “D:” is the drive letter of your CD-ROM drive). Click [OK].

(If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive.)

The installation will start.

3When the setup program starts, follow the on-screen instructions.

4When the [Setup Type] dialog box appears, select [Standard], then click [Next].

L Readiris OCR software (page 52) and Device Monitor (page 55) will also be installed.

5When the [Connect Type] dialog box appears, select [Connect directly with a USB cable.], then click [Next].

L The [Connect Device] dialog box will appear.

6Connect the unit with the USB cable (page 47), then click [Next].

L If the unit is connected to your computer, the model name will be automatically detected.

L You can change the names for the printer, PC fax, and scanner if necessary.

7Click [Install], then follow the on-screen instructions.

L The files will be copied to your computer.

Important notice for Windows XP users

LIf you use Windows XP, the following message may appear after step 6: “The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP”

This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem.

Note:

LIf the screen prompts to insert the CD-ROM for operating system when installing Multi- Function Station, insert it into your CD-ROM drive.

To use the other unit with the computer

You need to add the printer driver for each unit, as follows.

Click [Start], then select [All Programs] or [Programs] → [Panasonic] → [KX- FLB800_FLM650 Series] → [Add Printer Driver]. Then follow the on-screen instructions from step 5.

Note:

LYou cannot connect more than one unit to the same computer at the same time.

To modify the software

You can select the components to install anytime after the installation.

For Windows XP and Windows 2000 users, you must be logged in as an administrator in order to modify Multi-Function Station.

1.Click [Start], then select [All Programs] or

[Programs] → [Panasonic] → [KX- FLB800_FLM650 Series] → [Uninstall or Modify].

2.Select [Modify] and click [Next], then follow the on-screen instructions.

To uninstall the software

For Windows XP and Windows 2000 users, you must be logged in as an administrator in order to uninstall Multi-Function Station.

1.Click [Start], then select [All Programs] or

[Programs] → [Panasonic] → [KX- FLB800_FLM650 Series] → [Uninstall or Modify].

48