Hardware Installations and Upgrades
processor fan heat sink RM, refer to the boxed processor manual or the Intel World Wide Web
site at: http://support.Intel.com/support/processors/pentium4/intnotes478.htm
Connecting the Processor Fan Heat Sink Cable
Connect the processor fan heat sink cable to the 4-pin processor fan header.
TP01380
Figure 14. Connecting the Processor Fan Heat Sink Cable
Removing the Processor
For instruction on how to remove the processor fan heat sink and processor, refer to the processor
installation manual or Intel support at:
http://support.Intel.com/support/processors/pentium4/intnotes478.htm
Installing and Removing a PCI Express* x8 Card CAUTION
When installing any PCI Express* x8 card on the server board, ensure that it
is fully seated in the PCI Express* x8 connector before you power on the
system. If the card is not fully seated in the connector, an electrical short
may result across the connector pins. Depending on the over-current
protection of the power supply, certain board components and/or traces may
be damaged.
Installing a PCI Express* x8 Card
Follow these instructions to install a PCI Express* x8 card:
1. Observe the precautions in " Safety Information" at the beginning of this document.
2. Place the car d in the PCI Express* x8 connector.
3. Press down on the card until it is completely seated in the connector.
14 Intel® Entry Server Board SE7221BA1-E User Guide