Panasonic KX-FLB851 Using the unit as a fax machine, Sending a fax manually, Fax, Resolution

3. Fax

3.1Using the unit as a fax machine

3.1.1 Entering the fax mode

Before sending a fax, set the operation mode to the fax mode.

{FAX}

Press {FAX} to turn the {FAX} light ON.

Note:

LYou can change the default operation mode (feature #463 on page 62) and the timer before returning to the default operation

mode (feature #464 on page 62).

LReceived documents will be stacked on the lower output tray. You can change the output tray for faxing (Feature #441 on page 65).

3.2 Sending a fax manually

3.2.1Using the auto document feeder

LConfirm that there are no documents on the scanner glass.

{CONTRAST}

{RESOLUTION}

1

{FAX}	{STOP}
{QUICK SCAN}	{START}
{SET}{V}{^}	{MONITOR}

{REDIAL}

1If the {FAX} light is OFF, turn it ON by pressing {FAX}.

2Adjust the width of the document guides (1) to fit the actual size of the document.

3Insert the document (up to 50 pages) FACE UP into the feeder until a single beep is heard.

L If the document guides are not adjusted to fit the document, re-adjust them.

4If necessary, change the following settings according to the type of document.

L To select the resolution, see page 26. L To select the contrast, see page 26.

5Press {MONITOR}.

6Dial the fax number.

7Press {START}.

Note:

LAny document which can be sent as a fax can

also be copied and scanned (page 28).

LDo not open the document cover when sending a fax with the auto document feeder.

To stop sending

Press {STOP}.

To select the resolution

1.Press {RESOLUTION}.

2.Press {V} or {^} repeatedly to select the desired resolution.

–“STANDARD”: For printed or typewritten documents with normal-sized characters.

–“FINE”: For documents with small print.

–“SUPER FINE”: For documents with very small print. This setting is effective only when the other party has a compatible fax machines.

–“PHOTO”: For documents containing photographs, shaded drawings, etc.

LUsing the “FINE”, “SUPER FINE” and

“PHOTO” settings will increase transmission time.

LIf the resolution setting is changed during feeding, it will be effective from the next page.

To select the contrast

You can adjust this setting depending on the lightness or darkness of the document. 5 levels (light to dark) are available.

1.Press {CONTRAST}.

2.Press {V} or {^} repeatedly to select the desired contrast.

26