Panasonic KX-FLB851 manual L Push and lock the plate 2 in the paper input tray, if it is lifted

1. Introduction and Installation

3 Before loading a stack of paper, fan the	6 Close the paper input tray.
paper to prevent paper jams.

4 Load the paper, print-side up (1).

Important:

L Push and lock the plate (2) in the paper input tray, if it is lifted.

1

2

5Adjust the width to the size of the recording paper by sliding the front side of the guide (1).

L Make sure that the recording paper is under the paper limit mark (2), and the paper should not be over the snubbers (3).

Note:

LIf the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam.

LIf the paper input tray dose not close, the plate in the paper input tray may be lifted. Push the paper and check that the paper is flat in the paper input tray.

To pull the paper input tray completely out

Pull the paper input tray (1) until it clicks into place, then pull it completely out, lifting the front part of the tray.

2 3 1

L To insert the paper input tray

1

Insert the paper input tray (1) to the unit, lifting the front part of the tray. Then push it completely into the unit.

3

1

16For assistance, please visit http://www.panasonic.com/consumersupport