Panasonic KX-FLB851 manual For best performance, Toner cartridge and drum unit, Static electricity

Important Information

For best performance

Toner cartridge and drum unit

LFor optimal performance, genuine Panasonic toner cartridges and drum units are recommended. We cannot be responsible for problems that may be caused by a non- Panasonic toner cartridge or drum unit:

–Damage to the unit

–Poor print quality

–Improper operation

LIn the printing process, heat is used to fuse toner onto the page. As a result, it is normal for the machine to produce an odor during and shortly after printing. Be sure to use this

unit in an area with proper ventilation.

LTo extend the life of the drum unit, the unit should never be turned the power switch OFF immediately after printing. Leave the power

switch turned ON for a minimum of 30 minutes after printing.

LDo not cover slots or openings on the unit. Inspect the air circulation vents regularly and

remove any dust build-up with a vacuum cleaner (1).

LWhen replacing the toner cartridge or drum unit, do not allow dust, water, or liquids to come in contact with the drum. This may affect print quality.

Static electricity

LTo prevent static electricity damage to the interface connectors or other electrical components inside the unit, touch a grounded metal surface, such as the metal part (2) before touching the components.

1

2

Environment

LKeep the unit away from electrical noise generating devices, such as fluorescent lamps and motors.

LThe unit should be kept free from dust, high temperature and vibration.

LThe unit should not be exposed to direct

sunlight.

LDo not place heavy objects on top of the unit. L When you leave the unit unused for a long

period of time, unplug this unit from the power outlet.

L The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 10 °C (50 °F) or greater than 32.5 °C (90.5 °F). Damp basements should also be avoided.

Recording paper

LStore unused paper in the original packaging, in a cool and dry place. Not doing so may affect print quality.

Routine care

LWipe the outer surface of the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.

Moving the unit

L The unit weights approximately 18 kg (39.7 lb.). It is highly recommended that two people handle this unit.

LWhen moving the unit, hold the both side grips (1).

1

1

For assistance, please visit http://www.panasonic.com/consumersupport 5