Panasonic KX-FLB851 manual 0 “OFF” default 1 “ON” To send a document, Ecm Selection Mode=On

8. Programmable Features

company. This feature can be set up to 24 hours in advance of the desired time.

{0} “OFF” (default) {1} “ON”

To send a document:

1.Insert the document into the auto document feeder.

2.If necessary, change to the desired resolution (page 26) and the desired contrast (page 26).

3.Press {MENU}.

4.Press {#}, then {4}{1}{2}.

5.Press {1} to select “ON”.

6.Press {SET}.

7.Enter the fax number.

LTo enter an item using one-touch dial feature and navigator directory, see step 4 on page 31. (When using navigator directory, you do not have to press {DIRECTORY} before pressing {V} or

{^}.)

8.Press {SET}.

9.Enter the transmission start time.

LPress {*} repeatedly to select “AM” or “PM”.

10.Press {SET}.

LThe document will be fed into the unit and scanned into memory. The unit will then send the data at the specified time.

Note:

LTo cancel after programming, press {STOP}

then {SET}.

LYou can also send a document using the scanner glass. Press {SET} in step 10, then press {START}.

{#}{4}{1}{3} Setting the Error Correction

Mode (ECM)

ECM SELECTION

MODE=ON [V^]

This feature is available when the sending / receiving fax machines are ECM compatible. {0} “OFF”: Deactivates this feature.

{1} “ON” (default): If there is an error during fax transmission / reception, the unit will support the communication.

{#}{4}{1}{6} Setting the connecting tone

CONNECTING TONE

MODE=ON [V^]

If you often have trouble when sending faxes, this feature allows you to hear connecting tones: fax tone, ring back tone and busy tone. You can

use these tones to confirm the status of the other party’s machine.

{0} “OFF”: Deactivates this feature.

{1} “ON” (default): You will hear connecting tones.

Note:

LIf the ring back tone continues, the other party’s machine may not be a fax machine or may have run out of paper. Check with the

other party.

LThe connecting tone volume cannot be adjusted.

{#}{4}{3}{0} Activating the Distinctive Ring feature

DISTINCTIVE RING

MODE=OFF [V^]

{0} “OFF” (default) {1} “ON”

See page 41 for details.

{#}{4}{3}{1} Setting the ring pattern for fax (Distinctive Ring feature)

FAX RING PATTERN

RING=B–D [V^]

{1} “A” {2} “B” {3} “C” {4} “D”

{5} “B-D”(default) See page 42 for details.

{#}{4}{3}{2} Receiving other size documents

AUTO REDUCTION

MODE=ON [V^]

To receive a fax document that is longer than your recording paper.

{0} “OFF”: The unit will print the original size.

{1} “ON” (default): The unit will fit received documents onto your recording paper.

{#}{4}{3}{4} Changing the fax activation code

FAX ACTIVATION

MODE=ON [V^]

If you wish to use an extension telephone to receive faxes, activate this feature and program the activation code.

{0} “OFF”

{1} “ON” (default)

1.Press {MENU}.

2.Press {#}, then {4}{3}{4}.

64