Panasonic KX-FLB851 manual Sending the same document to pre-programmed parties, Manual Broad, Fax

3. Fax

8Press {STOP} to exit.

3.6.4Sending the same document to pre-programmed parties

LMake sure that the {FAX} light is ON.

1Insert the document FACE UP into the feeder.

L Confirm that there are no documents on the scanner glass.

2If necessary, change to the desired resolution (page 26) and the desired contrast (page 26).

3Press the desired {BROADCAST} (1-2) or

{MANUAL BROAD}.

L The document will be fed into the unit and scanned into memory. The unit will then send the data to each party, calling each number sequentially.

L After transmission, the stored document will be erased from memory automatically, and the unit will automatically print a report (broadcast sending report).

Note:

LDo not open the document cover when

sending a fax with the auto document feeder.

LIf you select “FINE”, “SUPER FINE” or

“PHOTO” resolution, the number of pages that the unit can send will decrease.

LIf the document exceeds the memory capacity, sending will be canceled.

LIf a party is busy or does not answer, it will be skipped and redialed later 1 time.

To send the same document using the scanner glass

LConfirm that there are no documents in the auto document feeder.

1.Open the document cover.

2.Place the document FACE DOWN, then close the document cover.

3.Press the desired {BROADCAST} (1-2) or

{MANUAL BROAD}.

L To send a single page, skip to step 6. L To send multiple pages, go to the next

step.

4.Place the next page.

5.Press {SET}.

LTo send more pages, repeat steps 4 and 5.

6.Press {START}.

To cancel broadcast transmission

1.Press {STOP} while “BROADCASTING” is displayed.

L The display will show “SEND CANCELED?”.

2.Press {SET}.

33