Whirlpool 960 Series warranty Using Canceijdrain, To clear the indicators, To cancel a cycle, Inal

	r A “*”shows	what each cycle includes-			CYCLE
		MAIN		-INAL	TIME
CYCLE	llNSE	YASH	?INSE 3INSE PRY Minutes)
				-
Heavy
	.	et	.	Ott .	76’

*The water heats to 140°F (60°C) in the final rinse (marked ++)unless you select LOW ENERGY RINSE.

Pots-N-Pans

. .

.

Eii

Double wash for maximum cleaning of cooked-on or baked-on foods.

l The water heats to 140°F. .t .. 76* (60°C) in both washes

(marked +).

l The water heats	to 140°F	(60%) in
the final rinse (marked++) unless
you select LOW	ENERGY	RINSE.	-

‘Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

Using CANCEIJDRAIN

Press CANCEUDRAIN to cancel a cycle or

- to clear the indicators.

1

To clear the indicators:

Press CANCEL/DRAIN before starting

the dishwasher to clear all cycle and option selections.

To cancel a cycle:

l

l

Press CANCEL/DRAIN while the dish- washer is running to start a 2-minute drain. It will take a few seconds for the drain to start. If desired, select a new cycle. (See “Changing a cycle or an option setting” on page 14.)

You can press CANCEL/DRAIN again to stop the drain immediately. Remember to drain the dishwasher again before starting a new cycle.

NOTE: A small amount of water remaining in the dishwasher is normal.

13