American Standard 7242.XXXW installation instructions Xxxw Series Whirlpool, Rondo, Thank You

RONDO™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

7242.XXXW

SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

●RECOMMENDED FITTING		165mm
LOCATION 64 X 279mm
		(6-1/2)
	(2-1/2 X 11)
267mm
(10-1/2)
1067mm	PUMP
(42)		ON/OFF
		SWITCH

1816mm

(71-1/2)

908mm (35-3/4)

76mm

(3)C/L OF DRAIN

229 X 305mm (9 X 12) CUTOUT

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

PROVIDE ACCESS

TO PUMP FOR SERVICE ON ALL INSTALLATIONS

C/L OF

OVERFLOW

95mm (3-3/4)

83mm (3-1/4)

38mm

▲OUTLINE OF

CUTOUT		■LEVELING STRINGER
SAFE-T-HEATER		NOT FOR SUPPORT
REMOVABLE BLANK			51mm
	(2)

495mm (19-1/2)

546mm (21-1/2)

ROUGH

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your Home Depot Retailer

(1-1/2)

38 mm (1-1/2)

FLOOR

TAILPIECEINTEGRAL FEET

GENERAL SPECIFICATIONS FOR 7242 WHIRLPOOL

INSTALLED SIZE		71-1/2 x 42 x 21-1/2 In (1816 x 1067 x 546mm)
WEIGHT							94 Lbs.(43 Kg.)
WEIGHT w/WATER						818 Lbs.(371 Kg.)
GAL. TO OVERFLOW							87 Gal. (330 L)
WHIRLPOOL MIN. OPERATING VOL.							67 Gal. (254 L)
BATHING WELL AT SUMP				45 x 25 In. (1143 x 635mm)
BATHING WELL AT RIM				60 x 30 In. (1524 x 762mm)
WATER DEPTH TO OVERFLOW						14-7/8 In (378mm.)
FLOOR LOADING			39 Lbs./Sq.Ft. (191 Kgs./Sq.m)
(PROJECTED AREA)
PTS.									30.3
CUBE (FT3)								58.7
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP					2.1 HP, 14.4 AMPS,120.

GENERAL INSTALLATION INFORMATION

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

751709-100 REV. LAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.