1

WASHSTAND ASSEMBLY

Back Front

Thread the two legs with tapered upper ends into the threaded holes at the front of the cabinet. Thread the remaining legs into the two holes at the rear of the cabinet. Hand-tighten each of the four legs.

Thread knobs onto drawer with screws provided.

2

SINK AND WASHSTAND INSTALLATION

Note: If replacing an existing sink be certain to shut off water supply before removing old sink. If installing in a new bathroom follow rough-in diagram to locate rough supply, waste lines.

Provide suitable reinforcement behind finished wall for sink hanger screws. For an installed sink height of 36", center the reinforcement 30-3/4" above the floor.

C/L of 2 x 8

Support

and Bracket

30-3/4 "

Finished

Floor

31) Move washstand into approximate position near the wall.

2)Place sink on washstand, aligning the tapered ends of the front legs with the recesses in the underside of the front of the sink.

3)Place a level on the cabinet and use the four independently adjustable washstand feet to level the assembly both side-to-side and front-to-back.

4)Place the level on the sink. If adjustment is required, either front-to-back or side-to-side, remove the sink, place one or more of the adhesive-backed cushions on the top surfaces of any of the legs as appropriate, and replace the sink to verify.

5)Move the assembly into contact with the wall.

6)With a pencil, mark through the center of the two mounting holes found on the back of the sink. See VIEW "A".

7)Move the assembly well clear of the wall.

8)Drill two pilot holes at the center marks using a 1/4" bit. Bore in 1" deep.

9)Thread the two 5/16" headless hanger screws into the pilot holes leaving 1-7/8" thread exposed in front of the wall.

VIEW "A"

With lavatory in place mark the two mounting hole locations.

Feet are adjustable

4

Following manufacturer's instructions, install faucet and drain assembly (not included) in sink. Be certain to apply a bead of sealing putty on the underside of the drain to ensure a watertight seal between the sink and the drain. Remove excess putty immediately after tightening drain.

Move the assembly back toward the wall, guiding the sink over the two headless hanger screws. Place washers over studs and firmly hand-tighten nuts onto each.

Lavatory

Front Leg

Hanger Screw,

of Washstand

Washer & Nut

- 2 -

7 3 0 8 0 5 - 1 0 0

Page 1 Page 3
Page 2
Image 2
American Standard 9440.000 installation instructions Washstand Assembly
Page 1 Page 3

9440.000 specifications

The American Standard 9440.000 is a popular and highly regarded sink faucet, designed with both functionality and aesthetics in mind. This faucet combines sleek, contemporary looks with advanced features that enhance the user experience in the kitchen or bathroom.

One of the main features of the American Standard 9440.000 is its ergonomic design, which greatly simplifies operation. The single-handle lever allows for easy control of both water temperature and flow, making it user-friendly for individuals of all ages. The spout has a high arc that not only adds to the modern aesthetic but also provides ample space for filling large pots and handling various kitchen tasks, or for effective washing in a bathroom setting.

Another notable characteristic of this faucet is its durable construction. Made with quality materials, the American Standard 9440.000 is designed to withstand daily wear and tear. Its finish is resistant to tarnishing and flaking, ensuring the faucet continues to look great over time without the need for frequent maintenance.

The faucet is equipped with American Standard's innovative technologies that enhance performance and efficiency. The ceramic disc valve is a standout feature that provides a lifetime of drip-free performance. This technology helps to prevent leaks and allows for smooth operation of the water flow, contributing to water conservation efforts.

Additionally, the 9440.000 model is compatible with standard plumbing setups, making installation straightforward for professionals and DIY enthusiasts alike. The inclusion of a comprehensive installation guide assists users in mounting the faucet with ease.

American Standard takes pride in not only the functionality and design of the 9440.000 faucet but also in its commitment to sustainability. The faucet is designed to reduce water consumption without sacrificing performance. It meets or exceeds the EPA's WaterSense criteria, which promotes the use of water-efficient products.

In summary, the American Standard 9440.000 is a well-rounded faucet that combines modern design with practical technologies. Its durable construction, ease of use, and eco-friendly features make it a favored choice for homeowners looking to enhance their living spaces. Whether installed in a kitchen or bathroom, this faucet delivers both style and efficiency for everyday tasks.
Top Page Image Contents