ProForm PFEL3926.1 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 17. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.

M4 x 16mm	M4 x 22mm	M8 Split	M10 Split	M8 Washer
Screw (66)–8	Screw (76)–2	Washer (83)–2	Washer (94)–2	(53)–6

Wave Washer

(91)–2

M8 Jamnut	M8 Nylon	M10 Nylon	Cover Screw	M8 x 16mm
					Button
(101)–4	Locknut (46)–6	Locknut (29)–4	(82)–4	Screw (84)–4

	M8 x 45mm Button
M8 x 25mm Patch
Screw (22)–2	Bolt (50)–4

M10 x 75mm Carriage Bolt (34)–2

M10 x 45mm Button Bolt (33)–2

M8 x 72mm Button Bolt (67)–2

M10 x 83mm Button Screw (63)–2

M10 x 59mm Bolt Set (27)–2

5