Unclogging Spray Tip/Guard Assembly
Unclogging Spray Tip/Guard Assembly
Do not operate or spray near children. Do not aim the sprayer at, or spray any person or animal. Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part of the body.
1.To unclog tip obstruction, engage trigger lock and put prime/pressure relief valve UP to release pres- sure.
ti16700a
ti16699a
2. Reverse spray tip to UNCLOG position.
ti14991a
3.Aim sprayer at waste area, disengage trigger lock, and put prime/pressure relief valve DOWN to spray position. Pull trigger to clear clog.
5.Disengage trigger lock, put prime/pressure relief valve DOWN to spray position, and resume spray- ing.
ti16698a ti16701a
6.If tip is still clogged, you may have to repeat steps 1 - 5 and rotate the tip from SPRAY to UNCLOG several times. Repeat step 1 to release pressure, remove and clean filter, or replace with new tip assembly.
ti14989a
NOTE: Filter assembly is
NOTICE
Make sure filter is completely screwed into the Tip/Guard Assembly to avoid damage to the filter. Do not use a damaged filter or poor sprayer performance may result.
7.When obstruction is cleared, engage trigger lock and rotate
ti16698ati16701a
ti16699a | ti16992a |
|
4.Engage trigger lock. Put prime/pressure relief valve UP to release pressure and rotate spray tip back to SPRAY position.
ti16700a
ti16992a 
3A1698F | 15 |
