Manuals / Graco / Power Tools / Paint Sprayer

Graco 16H829, 262612, 16H241, 16H243 Pressurized Aluminum Parts Hazard, Toxic Fluid Or Fumes Hazard

Models: 16H829 16H242 262612

1 32

Download 32 pages 47.92 Kb

Page 6

PRESSURIZED ALUMINUM PARTS HAZARD

Warnings

WARNING

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDS’s to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

6

3A1698F

Image 6

Graco 16H829, 262612, 16H241 Pressurized Aluminum Parts Hazard, Toxic Fluid Or Fumes Hazard, Personal Protective Equipment

Contents

3A1698F Service only at Graco approved service centersFine Finish Hand-Held Paint Sprayer OperationTable of Contents Important User InformationDO NOT RETURN THIS SPRAYER TO THE STORE Warnings Grounding Wire RepairFIRE AND EXPLOSION HAZARD SKIN INJECTION HAZARDBATTERY HAZARD EQUIPMENT MISUSE HAZARDCHARGER ELECTRIC SHOCK, FIRE AND EXPLOSION HAZARD PRESSURIZED ALUMINUM PARTS HAZARD TOXIC FLUID OR FUMES HAZARDPERSONAL PROTECTIVE EQUIPMENT Component Identification Charging the Battery Charger Status Indicator LightsSprayer Status Indicator Prime/Pressure Relief Valve Position Pressure Relief ProcedureTrigger Lock Spray Tip PositionMotor Speed Setting Hi/Lo SwitchAdjusting Pressure Low SpeedSpraying Ceilings, Walls and Crown Molding SetupFlexible Suction Tube Spraying Floors and Base BoardsSprayer Setup Reversible Tip Selection Chart Starting a New Job or Refilling the CupFine Finish Materials and Tip Sizes Triggering Sprayer Install Tip/Guard Assembly if not installedGetting Started with Basic Techniques Aiming SprayerUnclogging Spray Tip/Guard Assembly Shutdown and Cleaning Flushing SprayerProtect the internal parts of this sprayer from water 10. If sprayer is not completely clean, repeat steps Cleaning Sprayer Exterior StorageFine Finish Tip Wear 3A1698F Replacement Parts and KitsReplacement Parts and Kits ti20355aOrder Part DescriptionNumber Parts ListIf you have this model sprayer Replacement Parts and KitsDescription NumberOrder Part DescriptionNumber If you have this model sprayerAlternate Priming Method Inlet Valve Removal/Service InstallationOutlet Valve Repair RemovalInstallation Solution TroubleshootingProblem CauseSolution Spray Pattern DiagnosticsProblem ProblemSee Reversible Tip Selection Chart, page ProblemSolution Replace tip. See Install Tip/Guard AssemblySprayer Technical DataBattery ChargerMaterial Preferred Material Settings LogPreferred Material Settings Log Motor Speed3A1698F Graco Standard Warranty Graco InformationOriginal