| Common Procedures |
Setting Hi/Lo Switch | Adjusting Pressure |
(Motor Speed) |
|
Low Speed | High Speed | ti16705a | ti16704a |
|
|
|
| Speed Control |
ti16731a | Switch |
1.To extend battery life, try spraying with low motor speed to get an acceptable spray pattern.
2.Shift to high speed if needed to achieve an accept- able spray pattern.
Minimum Pressure Setting Maximum Pressure Setting
1.To reduce overspray, always spray at lowest pres- sure that results in an acceptable spray pattern.
2.Spray test pattern and adjust pressure to get desired coverage.
3.With some materials, if pressure is set too low, no material may spray out. Turn pressure control up.
10 | 3A1698F |
