Getting Started
4Connect the second amplifier to SURROUND OUT CENTER, and connect the center speaker to this amplifier.
The center signal is output from the SURROUND OUT CENTER terminal.
| Amplifier 2 |
Receiver | (for center speaker) |
SURROUND OUT | INPUT |
REAR |
|
CENTER |
|
WOOFER |
|
5Remove the cover on the POWER SWAP selector and set the selector to the SWAP position.
After you have completed the setting, reattach the cover to the selector and plug in the power cord.
POWER SWAP
SWAP NORMAL
To adjust the volume
Set the volume control of the separate amplifiers to the maximum position and adjust the volume level with the volume control of the receiver.
Notes
•For best results, we recommend using a pair of equivalent amplifiers to boost front and center speaker output. You can, however, connect the center speakers to the CENTER SPEAKER terminals if you only have one additional amplifier.
•Do not use the terminals labeled CENTER SPEAKER or REAR SPEAKERS if you connect two additional amplifiers. Make connections as shown above.
•If you want to turn off the power swap function, set the POWER SWAP selector to the NORMAL position.
Where do I go next?
To complete your system, go to “AC Hookups” on page 9. If you want to connect video components to enjoy surround sound when watching TV programs or video tapes, go on to the next section.
TV/VCR Hookups
Overview
This section describes how to connect video components to the receiver. For specific locations of the jacks, see the illustration below.
TV/DBS LD VIDEO 2 VIDEO 1 MONITOR
5.1 INPUT
What cables will I need?
•Audio/video cable (not supplied) (1 for each TV or LD player; 2 for each VCR)
Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
•Video cable (not supplied) (1 for a TV monitor)
Yellow 
Yellow
Hookups
The arrow •indicates signal flow.
TV tuner or DBS (Digital Broadcasting Satellites) receiver
Receiver
TV/DBS
|
| TV/DBS |
|
| OUTPUT |
| VIDEO | VIDEO |
| IN | |
|
| |
| AUDIO | AUDIO |
| IN |
|
L |
| L |
R |
| R |
Monitor
If you are using your TV as a monitor, do not connect anything to the TV IN jacks.
Receiver
MONITOR | Monitor |
OUT | INPUT |
| |
| VIDEO |
OUT 2 OUT 1 |
|
8EN
