Advanced Remote Operations
Operating One Component While Using Another (background operation)
You can temporality operate other components while listening to or watching a program.
Changing the Factory Setting of a FUNCTION Button
If the factory settings of the FUNCTION buttons (page
11)don’t match your system components, you can change them. For example, if you connect a Sony LD player to the VIDEO 2 jacks, you can assign the VIDEO 2 button to set the remote to control the LD player.
Note that the settings of the TUNER and PHONO buttons cannot be changed.
Numeric buttons
BACKGROUND |
0 ) = +
1 | Hold down BACKGROUND. |
2 | Press both the corresponding numeric button of |
| the component you‘re going to use (see the table |
| below) and one of the following buttons at the |
Numeric buttons
0 ) = +
SYSTEM CONTROL/ FUNCTION
same time; VISUAL POWER, TV/VIDEO, CH |
PRESET |
0/), =/+, P, r. |
Example:To start recording on a tape deck while |
listening to a CD |
While holding down BACKGROUND, |
press 4 (or 5) and press r. |
The numeric buttons are assigned to select the functions as follows:
Numeric button | Operates |
|
|
1 | CD player |
|
|
2 | DAT deck |
|
|
3 | MD deck |
|
|
4 | Tape deck A |
|
|
5 | Tape deck B |
|
|
6 | LD player |
|
|
7 | VCR (remote control mode VTR 1*) |
|
|
8 | VCR (remote control mode VTR 2*) |
|
|
9 | VCR (remote control mode VTR 3*) |
|
|
0 | TV |
|
|
>10 | DBS |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta , 8mm and VHS respectively.
1Holding down the SYSTEM CONTROL/ FUNCTION button whose function you want to change (VIDEO 2, for example).
2Press the corresponding numeric button of the component you want to assign to the SYSTEM CONTROL/FUNCTION button (6 - LD player, for example).
For the numeric buttons, see the table in “Operating One Component While Using Another.”
Now you can use the VIDEO 2 button to control your Sony LD player.
To reset the setting to the factory setting
Repeat the above procedure.
