Onkyo TX-8555 Adjusting the Volume of Zone, Muting Zone, Adjusting the Tone of Zone

Zone 2—Continued

3	To turn off Zone 2, press the
	[ZONE 2] button, followed by the
	[ON/STANDBY] button.

Note:

•To control Zone 2, you must press the remote controller’s [ZONE 2] button first.

Adjusting the Volume of Zone 2

1	On the remote controller, press
	the [ZONE 2] Remote Mode
	button, and then use the VOL
	[ ]/[ ] buttons.

3	Use the Up and Down [ ]/[ ]
	buttons to adjust the balance.

You can adjust the balance from 0 in the center to +12 dB to the right or +12 dB to the left in 2 dB steps.

Muting Zone 2

On the remote controller, press the [ZONE 2] Remote Mode button, and then press the [MUTING] button.

To unmute a zone, on the remote controller, press the [ZONE 2] Remote Mode button, and then press the [MUTING] button again.

Adjusting the Tone of Zone 2

1	On the receiver, press the [ZONE
	2] button.

On the receiver, press the [ZONE
2] button, and then use the Up
	2	Press the receiver’s [TONE]
and Down [ ]/[ ] buttons.
		button repeatedly to select Bass

or Treble.

Adjusting the Balance of Zone 2

1	On the receiver, press the [ZONE
	2] button.

2	Press the receiver’s [TONE]
	button repeatedly to select
	Balance.

3 Use the Up and Down []/[] buttons to adjust the bass or treble.

You can boost or cut the Bass or Treble from -12 to +12 in 2 steps.

Notes:

•Zone 2 can also be unmuted by adjusting the volume.

•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 36).

38