Zone 2—Continued
Zone 2 Out Settings | 3 |
| RECEIVER |
4
/ | / | / |
SET UP | ENTER | 5 |
| ||
|
|
If you have connected your Zone 2 speakers to an amp with no volume control, set the Zone 2 Out setting to Variable so that you can set the zone’s volume, balance, and tone on the receiver.
1 | Press the [RECEIVER] Remote | |
Mode button, followed by the | ||
| ||
| [SETUP] button. |
The setup menu appears on the display.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “1. Hardware |
set,” and then press [ENTER].
The Hardware Setup menu appears.
Use the Up and Down [
]/[ ] buttons to select “Z2 Out: Fixed.”
Use the Left and Right [
]/[
] buttons to select:
Fixed: The Zone 2 volume must be set on the amp in that zone.
Variable: The Zone 2 volume can be set on the receiver.
Press the [SETUP] button.
Setup closes.
36
