Enjoying Audio Sources
Input selector buttons
INPUT
SELECTOR
VOLUME
SP A/B
/
1
Receiver
Remote
controller
Press the input selector button | 4 Receiver |
to select the component that you | |
want to listen to. |
|
| Remote |
| controller |
|
|
To adjust the volume, use the receiver’s [MASTER VOLUME] control, or the remote controller’s VOLUME [
]/[
] buttons.
Turn the control clockwise to turn up the volume or counterclockwise to turn down the volume.
2
Receiver
Use the [SPEAKERS A] and [SPEAKERS B] buttons on the receiver to select the speaker set that you want to use.
The A and B speaker indicators show whether each speaker set is on or off.
Indicators
Remote controller You can use the [SP A/B] button on the
remote controller. To select the speaker set, press the [SP A/B] button repeatedly.
Note for North American model:
When you connect a set of speakers whose impedance is 4 or 6 ohms and output sound only from this speaker set, the speaker impedance setting on the receiver should be set to 6 ohms (see page 15).
3 | Start playback on the selected | |
component. | ||
|
23
