Onkyo TX-8555 Listening to the Radio, AM Frequency Step Setup Not North America and Europe

Listening to the Radio

	DIRECT TUNING
TUNING DOWN/UP		Number buttons

TUNER TUNING MODE

Number buttons

D.TUN CLR

TUNING

/

/

AM Frequency Step Setup

(not North America and Europe)

You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

Use the receiver to perform the procedure below.

1	While pressing the [TUNER]
	button, press the [TUNING
	MODE] button.

Each press of the [TUNING MODE]

and button switches the frequency step

2

Receiver

Press the [TUNING MODE] button so that the AUTO indicator appears or disappears from the display.

Auto Tuning

To activate this mode, press the [TUNING MODE] button to turn on the “AUTO” indicator. In this mode, you will receive the broadcast in stereo sound.

Manual Tuning

To activate this mode, press the

setting between “10 kHz” and “9 kHz.”

[TUNING MODE] button to turn off the “AUTO” indicator. In this mode, you will receive the broadcast in monaural sound.

Release

After the desired frequency step is

3

Receiver

Press the TUNING [ DOWN] or [UP ] button.

You can also use the remote

controller’s TUNING [ ]/[ ]

the button displayed, release the [TUNER] button.

Listening to AM/FM Stations

With the built-in tuner, you can enjoy AM and FM radio stations.

buttons or arrow [ ]/[ ] buttons to

tune the radio.

Auto Tuning

Searching stops when a station is found.

Manual Tuning

1

Receiver

Use the [TUNER] input selector button to select AM or FM.

In this example, FM has been selected.

Band Frequency

(Actual display depends on country.)

The frequency stops changing when you release the button.

Press the buttons repeatedly to change the frequency one step at a time.

28