Onkyo TX-8555 Turning On the Receiver, Turning On and Standby, Changing the Input Display

Turning On the Receiver

ON/STANDBY

STANDBY indicator

ON/STANDBY

Turning On and Standby

1		Press the [ON/STANDBY] button.
		Alternatively, press the remote
	Receiver
		controller’s [ON/STANDBY]
		button.
		The receiver comes on, the display
		lights up, and the STANDBY indicator
	or	goes off.
	Remote
	controller
		To turn the receiver off, press the
		[ON/STANDBY] button, or press the
		remote controller’s [ON/STANDBY]
		button. The receiver will enter Standby
		mode. To prevent any loud surprises
		when you next turn on the receiver,
		always turn down the volume before
		you turn it off.

Changing the Input Display

For the TAPE and VCR/DVR buttons, the input display name can be changed in the sequence as shown below. When the input display name has been changed for one of the buttons below, the display name for the other button cannot be changed.

•TAPE button : TAPE→MD→CDR→DOCK

•VCR/DVR button : VCR/DVR→DOCK

1Press the appropriate input selector button.

or	The selected input name appears in the
	display.
2	Press and hold down the input
	selector button selected in the
	Step 1 above for approximately 3
	seconds to change the display
	name.

22