Onkyo TX-8555 Resetting the Remote Controller, Resetting the Remote Mode Buttons

Controlling Other Components—Continued

Programming a remote control code for controlling components connected via

By default, the [DVD], [CD], and [DOCK] REMOTE MODE buttons have been programmed with the remote control codes for controlling Onkyo products. To control

the components connected via , follow the steps below to program the appropriate remote control code for the component to be used.

1	Press and hold the [DVD], [CD],
	or [DOCK] REMOTE MODE
	button along with the [AUDIO]
	button for more than three
	seconds.
	and

(3 seconds or more)

2	Select an appropriate 4-digit
	code from the list provided
	below, and then enter the code
	using the number buttons while
	the REMOTE MODE button is lit
	(for approximately 30 seconds).

When a correct code is entered:

The REMOTE MODE button quickly flashes twice, and programming completes.

When an incorrect code is entered or an incorrect button is pressed:

The REMOTE MODE button flashes once, and programming fails. Repeat steps 1 and 2.

Remote control codes for controlling components connected via :

[DVD]:	5002 (5001 by default)
[CD]:	6002 (6001 by default)
[DOCK]:	9002 (9001 by default)

Resetting the REMOTE MODE Buttons

You can reset a REMOTE MODE button to its default remote control code.

1	While holding down the REMOTE
	MODE button that you want to
	reset, press and hold down the
	[DISPLAY] button until the button
	REMOTE MODE button lights up
	(about 3 seconds).
	and

(3 seconds)

2	Press the REMOTE MODE button
	again.
	The REMOTE MODE button flashes
	twice, indicating that the button has
	been reset. Each REMOTE MODE
	button is preprogrammed with a remote
	control code. When a button is reset, its
	preprogrammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1	While holding down the
	[RECEIVER] REMOTE MODE
	button, press and hold down the
	[DISPLAY] button until the
and	REMOTE MODE button lights up
	(about 3 seconds).
(3 seconds)
2	Within 30 seconds, press the
	[RECEIVER] REMOTE MODE
	button again.
	The REMOTE MODE button flashes
	twice, indicating that the remote
	controller has been reset.

44