Recording
Unless you have the full consent of the copyright holder, copyright laws prohibit using your recordings for anything other than personal enjoyment!
This section explains how to record the selected input source to a component with recording capability.
Input selector buttons
Recording the Input Source
You can record an audio signal on a recording component connected to the TAPE OUT, or VCR/DVR OUT jacks.
1 | Prepare the recorder: | |
• Set the recorder so that it’s ready for | ||
| ||
| recording. | |
| • If necessary, adjust the recording level on the | |
| recorder. | |
| • See the recorder’s manual for more | |
| information. | |
|
| |
2 | Use an input selector button to select | |
the component that you want to record | ||
| ||
| from. | |
|
| |
3 | Start playback on the component | |
selected in step 2. | ||
| ||
| Note: | |
| If you select another input source during | |
| recording, the newly selected input source will | |
| be recorded. | |
|
|
Note:
The volume, balance, mute and tone controls have no effect on the signal being recorded.
26
