American Standard Monoblock Lavatory Faucet with Speed Connect Drain installation instructions

M 9 6 5 2 2 7

Installation

Instructions

QUENTIN™7440.101

MONOBLOCK LAVATORY

FAUCET with Speed Connect™ Drain

Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets.

Speed Connect Drain*

•Fewer parts, installs in less time

•Never needs adjustment

•Guaranteed to seal properly the first time, every time.

Certified to comply with ANSI A112.18.1

*Your new American Standard faucet is designed to work only with the Speed Connect drain.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Recommended tools

	Screwdriver		Channel Locks	Adjustable Wrench
1			Turn off hot and cold water
	INSTALL FAUCET	CAUTION
			supplies before beginning.

Installation with ESCUTCHEON PLATE: Apply a light bead of plumbers putty

to underside of ESCUTCHEON PLATE (9) if mounting surface is uneven. Place ESCUTCHEON PLATE (9) onto sink or mounting surface. Feed FAUCET SUPPLIES (3), MOUNTING

STUD (4) and DRAIN CABLE ASSEMBLY (8) through ESCUTCHEON PLATE and PUTTY PLATE (9) and mounting hole of lavatory or mounting surface. Fig. A.

Installation less ESCUTCHEON PLATE:

Seat SEAL (1) into under side of FAUCET BASE (2).

Feed FAUCET SUPPLIES (3), MOUNTING STUD (4) and DRAIN CABLE ASSEMBLY (8) through the mounting hole of lavatory or mounting surface. Fig. B.

Fig. A.

9

7

5

6

4

2

1	GROOVE
	(FAUCET
3	BASE)	PUTTY
	4	IF REQUIRED
Fig. B.
COLLAR ON	MOUNTING SURFACE
MOUNTING NUT

Fig. C.

From below, push GASKET (7) and RETAINING WASHER (5) onto
MOUNTING STUD (4). Secure Faucet with MOUNTING NUT (6),
pulling faucet to front of sink, so SUPPLIES (3) rests against
mounting hole. Before final tightening, make sure collar on
MOUNTING NUT (6) is seated into RETAINING WASHER (5).
Fig. C .	8

Adjust Faucet so that it is centered. Tighten MOUNTING NUT (6) to complete faucet mounting.

1