American Standard none installation instructions Saniwares

5	Affix hanger to wall (hand tighten only). Mount lavatory for	7	Return the fitted lavatory to the installed position.
	positioning, level the deck, and mark bottom anchor screw		Connect trap to drain assembly hand tight to check
	holes (if applicable). Remove lavatory, tighten the hanger		alignment. It may be necessary to cut off part of the
	positioning screws and drill pilot holes for anchor screws		tailpiece (area "B") or part of the horizontal leg of the
	and 4 mounting screws. Install and tighten the mounting		trap (area "C").
	screws.

Steel
Hanger
Mounting	C
Screw	B
Positioning
Screw
Lavatory	Anchor Screw
	(if used)

6	Following manufacturers instructions, install faucet and	8	Secure lavatory on hanger as shown in 5. Insert and
	drain assembly. (Not included). Be certain to apply a		tighten anchor screws if applicable. Connect hot and
	bead of sealing putty on the underside of the drain (Part		cold supply lines to the shut-off valves. Tighten trap
	"A") in order to ensure a watertight seal between the		joints for watertight assembly. Apply a bead of caulk
	lavatory and drain. Remove excess putty after installing		around the edge which contacts the wall as shown.
	drain on lavatory.
				Caulk

Shut-off

Valves

Saniwares

AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY

If inspection of this American Standard plumbing product, within one year after its initial installation, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This limited warranty does not apply to local building code compliance; since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

In the United States:	In Canada:	In Mexico:
American Standard, Inc.	American Standard, Inc.	Customer Service Manager
One Centennial Ave.	2480 Stanfield Rd.,	American Standard, Inc.
Piscataway, New Jersey 08855	Mississauga, Ontario	Via Morelos #330
Attention: Director of Consumer Affairs	Canada L4Y 1S2	Col. Santa Clara
Toll Free: (800) 442-1902	Toll Free: (800) 387-0369	Ecatepec 55540 Edo. Mexico

730427-100 Rev. B