ELECTRICAL FEATURES
Operator panel is stainless steel NEMA 4 rated and contains the following:
•Allen Bradley PanelView 300 operator interface which displays:
-Machine start and stop
-Operation speed
-Status, alarm and history messages
•Allen Bradley push buttons for the following functions:
-Alarm acknowledge/reset
-MCR reset
-Emergency stop
NEMA 12 enclosure (painted steel) including:
•Main power disconnect
•Allen Bradley MicroLogix 1100 programmable logic controller
•Allen Bradley AC inverter for main drive
Machine Mounted
Operator Control Station
ELECTRICAL OPTIONS
•NEMA 4X stainless steel main electrical enclosure
•Processor and operator interface upgrades
SPECIFICATIONS
Throughput range:
Scaling range from 12 oz. (340 g) to 40 oz. (1134 g) at 65 lbs/ft3 dough density
Rounding track length:
1 3/4 turn model - 256" (6052 mm)
2 1/4 turn model - 316" (8026 mm)
2 1/2 turn model - 340" (8636 mm)
Up to 180 units per machine depending on scaling weight and product
Electrical requirements:
17 KVA
Standard voltage - 460 volts/3 phases/60 Hz (other voltages available)
Control Power - 24 VDC inputs/120 VAC outputs
Approximate Dimensions:
88" L x 53" W x 56" H (2235 mm x 1346 mm x 1422 mm) Infeed height approximately 33" (838 mm)
Discharge Height:
1 3/4 turn model - approximately 50 1/2" (1283 mm) 2 1/4 turn model - approximately 58 1/2" (1486 mm) 2 1/2 turn model - approximately 62 1/2" (1588 mm)