Introduction
4MVP-5100/5150 Modero Viewpoint Touch Panels
MVP-5100 5.2" Modero ViewPoint IR Touch Panel

The MVP-5100 differs from the MVP-5150 in that it does not have a built-in wireless card or the

capacity to install one, and only communicates with other devices via IR. Otherwise, the two devices are

identical.

MVP-5100 Specifications (FG5966-08)

Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
Weight: • 1.25 lbs (0.57 kg)
Enclosure: Matte black plastic.
Power Requirements
(Without Charging):
Panel with battery fully charged:
• Constant current draw: 0.3 A @ 12 VDC
• Startup current draw: 0.4 A @ 12 VDC
Power Requirements
(While Charging):
Panel while charging battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.3 A @ 12 VDC
Minimum Power Supply
Required:
• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
shipped with this power supply
Power Modes: •AWAKE: All necessary modules are powered up and device remains online
with the Netlinx Master.
• ASLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the Awake Mode in ~ 1 second.
•PROCESSOR SHUTDOWN: Power to all peripherals and components is
turned off. The system remains in this mode until it is rebooted.
Certifications: • IEC60950
•RoHS
• TELEC
• Lithium polymer microbattery: UN/IATA
Battery Duration: • Four days of normal use (25% Awake state, 25% standby, and 50%
Processor Shutdown).
• Three hours of continuous use (continuous Awake state).
Memory: • 128 MB Mobile DDRAM (upgrade not available)
• 256 MB NAND Flash (upgrade not available)
Panel LCD Parameters: • Size: 5.2" (13.21 cm)
• Type: WVGA
• Aspect ratio: 16 x 9
• Brightness (luminance): 300 cd/m2
• Channel transparency: 8-bit Alpha blending
• Contrast ratio: 20:1
• Display colors: 262,144 colors (18-bit color depth)
• Dot/pixel pitch: 0.23 mm
• Panel type: TFT Color Active-Matrix
• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency
• Viewing angles:
Vertical: + 40° (up from center) and - 80° (down from center)
Horizontal: + 60° (left from center) and - 60° (right from center)
External Components
Connector: 5-pin Mini-USB connector used for programming, firmware updates, and touch
panel file transfer between the PC and the target panel.
Note: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On before attempting to connect the USB
cable from the PC to the mini-USB port on the panel.