| Programming | |
| ||
| ||
|
| |
SET BAUD | Syntax: | |
Sets the | SEND_COMMAND <DEV>,'SET BAUD | |
port's communication param- | (Baud),(Parity),(Data),(Stop) (485 DISABLE/ENABLE)' | |
eters. | Variables: | |
| ||
| Baud = 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 (factory set | |
| default), 57600, 76800, 115200, 230400 | |
| Parity = N (none), O (odd), E (even), M (mark), S (space) | |
| Data = 7 or 8 data bits | |
| Stop = 1 or 2 stop bits | |
| 485 Disable = Disables | |
| 485 Enable = Enables | |
| Example: | |
| SEND_COMMAND RS232_1,'SET BAUD 9600,N,8,1 485 ENABLE' | |
| Sets the RS232_1 port's communication parameters to 9,600 baud, no parity, 8 | |
| data bits, 1 stop bit, and enables | |
|
| |
TSET BAUD | Syntax: | |
Temporarily sets the | SEND_COMMAND <DEV>,'TSET BAUD (Baud),(Parity),(Data), | |
422/485 port's communica- | (Stop) (485 DISABLE/ENABLE)' | |
tion parameters. | TSET BAUD works the same as SET BAUD, except that the changes are not | |
| ||
| permanent, and the previous values will be restored if the power is cycled on | |
| the device. | |
|
| |
HSOFF | Syntax: | |
Disables hardware hand- | SEND_COMMAND <DEV>,'HSOFF' | |
shaking (default). | Example: | |
| ||
| SEND_COMMAND RS232_1,'HSOFF' | |
| Disables hardware handshaking on the RS232_1 device. | |
|
| |
HSON | Syntax: | |
Enables RTS | SEND_COMMAND <DEV>,'HSON' | |
and CTS | Example: | |
hardware handshaking. | ||
SEND_COMMAND RS232_1,'HSON' | ||
| ||
| Enables hardware handshaking on the RS232_1 device. | |
|
| |
RXCLR | Syntax: | |
Clears all characters in the | SEND_COMMAND <DEV>,'RXCLR' | |
receive buffer waiting to be | Example: | |
sent to the Master Card. | ||
SEND_COMMAND RS232_1,'RXCLR' | ||
| ||
| Clears all characters in the RS232_1 device's receive buffer waiting to be sent | |
| to the Master Card. | |
|
| |
RXOFF | Syntax: | |
Stops transmitting received | SEND_COMMAND <DEV>,'RXOFF' | |
characters to the Master Card | Example: | |
(default). | SEND_COMMAND RS232_1,'RXOFF' | |
| ||
| Stops the RS232_1 device from transmitting received characters to the Master | |
| Card. | |
|
|
NXI NetLinx Integrated Controller | 13 |
|
|