AMX NXI Input/Output SendCommands, IR/Serial SendCommands Cont, I/O Sendcommands, Programming

Programming

IR/Serial Send_Commands (Cont.)

ZAP HIGH	Syntax:
Deletes all IR data stored in	SEND_COMMAND <DEV>, 'ZAP HIGH'
the NXI ports 12-15.	Example:
	SEND_COMMAND IR_4, 'ZAP HIGH'
	Deletes IR commands in ports 12-15 of the IR_4 device.
ZAP LOW	Syntax:
Deletes all IR data stored in	SEND_COMMAND <DEV>, 'ZAP LOW'
the NXI ports 8-11.	Example:
	SEND_COMMAND IR_1, 'ZAP LOW'
	Deletes IR commands in ports 8-11 of the IR_1 device.

Input/Output Send_Commands

The following Send_Commands program the I/O ports on the NXI.

I/O SEND_COMMANDS

GET INPUT	An active state can be high (logic high) or low (logic low or contact closure).
Gets the input channels	Channel changes, Pushes, and Releases generate reports based on their
	active state.
active state.
	Syntax:
	SEND_COMMAND <DEV>,'GET INPUT <CHAN>'
	Variable:
	CHAN = 1-8
	Example:
	SEND_COMMAND IO,'GET INPUT 1'
	Gets the I/O port's active state.
	System response:
	INPUT1 ACTIVE HIGH
SET INPUT	An active state can be high (logic high) or low (logic low or contact closure).
Sets the input channel's	Channel changes, Pushes, and Releases generate reports based on their
	active state. Setting an input to ACTIVE HIGH will disable the output for that
active state.
	channel.
	Syntax:
	SEND_COMMAND <DEV>,'SET INPUT <Channel> <State>'
	Variable:
	State = LOW or HIGH
	Example:
	SEND_COMMAND IO,'SET INPUT 1 HIGH'
	Sets the I/O channel to detect a high state change, and disables output on the
	channel.

NXI NetLinx Integrated Controller 21