AMX R-3 - page 24

Programming The Mio R-3

20 Mio Modero R-3 Remote

Serial Commands (Cont.)

ZAP!

Erase Configuration

Information in Flash Memory

Syntax:

ZAP! t

Variables:

• t = MENU or FONT or blank

Example:

ZAP!

Clears all configuration information and erases the font. The text displayed on

the LCD for the six devices returns to default and all parameters that can be set

in Setup Mode are reset to their default value.

ZAP! MENU

Sets the text displayed on the LCD for the six devices to the default values.

ZAP! FONT

Erases the font from the flash.

NOTE: These commands are intended for serial use only. These commands

cannot be issued when the device’s Setup Page is open.

ZIGC

Sets the ZigBee Channel

Syntax:

ZIGC <channel> (Decimal)

Example:

ZIGC 26

ZIGP

Sets the ZigBee PAN ID

Syntax:

ZIGP <panId> (Decimal)

Example:

ZIGP 123A

Contents

Main AMX Limited Warranty and Disclaimer Table of Contents Page Overview The Mio Modero R-3 Touch And Tilt Sensor Specifications The Mio R-3 device specifications are as follows: Mio R-3 (FG148-03) Specifications FCC Compliance 1. 2. Page Mio Modero R-3 Setup Inserting or Replacing the Lithium-ion Battery for the Mio R-3 1. 2. 3. Installing Custom Buttons Setup Mode 1. 2. Transmit Mode Timeout Adjustment Download Mode Debug Mode Firmware Version Device ID LED Awake Brightness LED Sleep Mode Brightness ZigBee ID PAN, Channel, and System Connection Site Survey Page Programming The Mio R-3 Using the Programming Jack on The Mio R-3 1. 2. 3. 4. 5. Updating Mio R-3 Firmware Channel Codes Channel Codes (Cont.) Serial Commands Serial Commands Page Page Page Page Page Send_Commands Send_Commands Page Page Page Page Page Mio Remote Charging Base The Mio remotes are complemented with a Mio-RCC charging base (FG147-02). Specifications Charging The Mio Remote with Charging Base 1. 2. 3. 4.